{"product_id":"avatar-ps-180-4-260w-4-channel-amplifier","title":"Deaf Bonce Avatar PS-180.4 4-Channel Car Amplifier – 1,040W Max Power, 2-Ohm Stable, Bridgeable","description":"\u003cp\u003ePower your system with the Deaf Bonce Avatar PS-180.4. This 4-channel car amplifier delivers 1,040W peak.\u003c\/p\u003e\u003ch3\u003eAt a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePower: 1,040W peak\u003c\/li\u003e\n\u003cli\u003eChannels: 4\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDetails\u003c\/h3\u003e\u003ch4\u003eHigh-Output Power for Your Whole System, in One Compact Amp\u003c\/h4\u003e \u003cp\u003eThe Avatar PS-180.4 4-channel car amplifier delivers serious, clean power for front stages, rear speakers and bridged setups, all from a single chassis. It puts out 4 × 180W RMS at 4 ohms and 4 × 260W RMS at 2 ohms (1,040W total). Bridged, it delivers 2 × 520W RMS, enough to drive larger speakers or a subwoofer from one amplifier.\u003c\/p\u003e \u003cp\u003eAt \u003cstrong\u003e10.63\" × 5.32\" × 2.05\"\u003c\/strong\u003e, it fits under seats, behind panels and in tight trunk spaces where a full-size amplifier won't.\u003c\/p\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003ctable\u003e \u003cthead\u003e \u003ctr\u003e \u003cth\u003eSpec\u003c\/th\u003e \u003cth\u003eDetails\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003eModel\u003c\/td\u003e \u003ctd\u003eAvatar PS-180.4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eChannels\u003c\/td\u003e \u003ctd\u003e4-channel amp\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower @ 4Ω\u003c\/td\u003e \u003ctd\u003e180W RMS × 4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower @ 2Ω\u003c\/td\u003e \u003ctd\u003e260W RMS × 4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eBridged power\u003c\/td\u003e \u003ctd\u003e520W RMS × 2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eTotal power @ 2Ω\u003c\/td\u003e \u003ctd\u003e1,040W\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCrossover frequency\u003c\/td\u003e \u003ctd\u003e50 Hz – 12 kHz (variable HPF\/LPF)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCrossover slope\u003c\/td\u003e \u003ctd\u003e12 dB\/octave\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eInput sensitivity\u003c\/td\u003e \u003ctd\u003e0.4 – 6V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSignal-to-noise ratio\u003c\/td\u003e \u003ctd\u003e≥ 90 dB\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFuse rating\u003c\/td\u003e \u003ctd\u003e187A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003ePower terminals\u003c\/td\u003e \u003ctd\u003e4 AWG \/ 21.2 mm²\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eWorking voltage\u003c\/td\u003e \u003ctd\u003e9 – 16.5V\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eProtection\u003c\/td\u003e \u003ctd\u003eYes\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e \u003ctd\u003e10.63\" × 5.32\" × 2.05\" (270 × 135 × 52 mm)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSKU\u003c\/td\u003e \u003ctd\u003eDEF-PS-180.4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eGTIN\u003c\/td\u003e \u003ctd\u003e4650185712814\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eWhy Choose the Avatar PS-180.4?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eSerious 4-channel power:\u003c\/strong\u003e 180W RMS × 4 at 4Ω, 260W RMS × 4 at 2Ω\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e1,040W total output:\u003c\/strong\u003e plenty of headroom for demanding front and rear stages\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eBridgeable to 2 × 520W:\u003c\/strong\u003e flexible for larger speakers or subwoofers\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eIndependent tuning per channel pair:\u003c\/strong\u003e separate gain and crossover controls for channels 1-2 and 3-4, so you can set front and rear stages separately\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eVariable HPF\/LPF crossover (50 Hz – 12 kHz):\u003c\/strong\u003e with switchable modes for each pair, to suit mids, tweeters, coaxials or subs\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePer-pair clip indicator LEDs:\u003c\/strong\u003e show when the signal starts to distort, so you can set gain properly and protect your speakers\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFull protection system:\u003c\/strong\u003e built for reliability when the amp is pushed hard\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e187A fuse rating and 4 AWG power terminals:\u003c\/strong\u003e accept up to 21.2 mm² wire for high-current installs\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCompact, install-friendly chassis:\u003c\/strong\u003e high output without a big footprint\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePerfect For\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUpgrading factory or aftermarket front and rear speakers\u003c\/li\u003e \u003cli\u003ePowering high-power component sets and coaxials\u003c\/li\u003e \u003cli\u003eBridged setups for larger speakers or a compact subwoofer\u003c\/li\u003e \u003cli\u003eBuilds where space is limited but output matters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCompatibility\u003c\/h3\u003e \u003cp\u003eWorks with 12V vehicle electrical systems (9–16.5V working range). Suitable for cars, trucks and SUVs. For best results, use quality 4 AWG wiring, a solid ground and a suitable fuse. Because this amp draws more current than the PS-150.4, make sure your charging system and wiring are up to the job.\u003c\/p\u003e \u003ch3\u003eFAQ\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHow much power does the Avatar PS-180.4 make?\u003c\/strong\u003e\u003cbr\u003e180W RMS × 4 at 4Ω, 260W RMS × 4 at 2Ω (1,040W total), or 520W RMS × 2 bridged.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan I bridge the PS-180.4?\u003c\/strong\u003e\u003cbr\u003eYes. Bridging channel pairs gives 2 × 520W RMS.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIs it 2-ohm stable?\u003c\/strong\u003e\u003cbr\u003eYes. It's rated at 260W RMS per channel at 2 ohms.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCan it run a subwoofer?\u003c\/strong\u003e\u003cbr\u003eYes. Bridged, it delivers 520W RMS per bridged pair, and the low-pass filter lets you set the crossover for a sub. Match your sub's impedance and power handling to the bridged output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWill it fit in a small space?\u003c\/strong\u003e\u003cbr\u003eYes. It measures 10.63\" × 5.32\" × 2.05\", so it fits under most seats and in tight trunk areas.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhat wire size do I need?\u003c\/strong\u003e\u003cbr\u003eThe power terminals accept 4 AWG (21.2 mm²) wire.\u003c\/p\u003e\u003ch3\u003eWhy buy from Stereo-Needs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFree shipping on every order\u003c\/li\u003e\n\u003cli\u003eFamily business with 20+ years selling car audio and 429,000+ items sold on eBay (99.9% positive)\u003c\/li\u003e\n\u003cli\u003eNot sure it fits your vehicle or system? Call or text 951-497-3497 before you order\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Deaf Bonce","offers":[{"title":"Default Title","offer_id":67692859883629,"sku":"DEF-PS-180.4","price":219.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0841\/0657\/5981\/files\/PS-180.4MAIN.png?v=1791610583","url":"https:\/\/stereoneeds.com\/products\/avatar-ps-180-4-260w-4-channel-amplifier","provider":"Stereo-Needs","version":"1.0","type":"link"}